Emerson-Fisher LP-Gas Equipment R232A-HBF Compact Integral 2-Stage Regulator, 9.5-13″ W.C Spring, POL x 1/2″ NPT

The Type R232A is an Underwriters Laboratories (UL) listed regulator designed for LP-gas (propane) systems. The unit is designed to reduce the tank pressure to an Outlet pressure of 11 inches Water Column through an integral two-stage system. Designed for installations with small domestic loads. The units compact size makes it ideal for tight fit applications. The first-stage Screened drip-lip vent is oriented downward and the second-stage vent is oriented over the Outlet as standard.

!!! WARNING !!! Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The installation in most States must also comply with NFPA no. 54 and 58 standards. Only Personnel trained in the proper procedures, codes, standards and regulations of the LP-gas industry should install and service this equipment.

BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION, INSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE PURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL INSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS PRODUCT.